Volver al blog
Guías prácticas 2026-11-21 Official KEF US Website | HiFi Speakers, Subwoofers 6 vistas

Nothing Headphone 1 Noise Cancellation Settings Guide

Nothing Headphone 1 Noise Cancellation Settings Guide

Learn how to adjust the noise cancellation settings on the Nothing Headphone (1). This guide covers ANC modes, transparency mode, and basic controls.

Understanding the Nothing Headphone (1) Noise Cancellation

The Nothing Headphone (1) offers active noise cancellation (ANC) to reduce ambient sound, along with a transparency mode that lets in outside noise when needed. Adjusting these settings is done through the onboard controls or the companion app, depending on your preference. This guide walks you through the available options and how to switch between them.

How to Adjust Noise Cancellation Settings

The following steps assume you have the Nothing Headphone (1) powered on and connected to your device. The exact button layout is not detailed in the supplied information, so refer to the product manual for precise button locations.

  1. Switch between ANC modes using the button: Press the dedicated ANC button on the headphone to cycle through the available modes: Noise Cancellation On, Transparency Mode, and ANC Off. Each press changes the mode.
  2. Use the companion app for finer control: The Nothing X app (available for iOS and Android) lets you customize ANC levels, adjust transparency mode, and update firmware. Open the app and navigate to the sound settings to find these options.
  3. Check the mode indicator: When you change modes, the headphone may provide an audible tone or voice prompt. The exact indicator type is not confirmed in the supplied information, so listen for a change in sound or check the app for confirmation.

Transparency Mode Explained

Transparency mode on the Nothing Headphone (1) allows external sounds to pass through the microphones, so you can hear your surroundings without removing the headphones. This is useful for brief conversations, announcements, or staying aware of traffic. To activate transparency mode, press the ANC button until the mode engages. You can adjust the transparency level in the companion app if you want more or less ambient sound.

Nothing Headphone (1) at a Glance

  • Nothing Headphone (1): Available in White and Black color options. Choose a finish that matches your style; the ANC and transparency features are identical across both colors.
    Nothing Headphone (1)
    Nothing Headphone (1)
  • Nothing Headphone (1): Brand: Nothing | Category: Headphones. The Nothing Headphone (1) is part of the Nothing ecosystem and is designed to work with the Nothing X app for settings and updates.

What the Supplied Information Does Not Cover

The supplied catalog information for the Nothing Headphone (1) does not include specific button diagrams, battery life during ANC use, or detailed app instructions. For precise button locations, charging times, or troubleshooting, refer to the official user manual or the Nothing support website. The information above is based on the confirmed product details and general ANC headphone operation.

Artículos relacionados

Customer Service
Inicio
Productos
Carrito
Perfil